Niagara Edge 10 is an IP-based device controller powered by the Niagara Framework®. Niagara Edge 10 controllers are capable of performing applications such as zone temperature control, operation of fan coil units, single stage air handling units, water source heat pumps and other devices. Niagara Edge 10 controllers run the full Niagara suite with 10 points of native IO and IO-R-34 expansion capability. Niagara Edge 10 licenses support three devices and 50 full points to take advantage of Niagara's full power.
Main features
NXP iMX6 SoloX2: 800 MHz ARM Cortex-A9/M4
512 MB DDR SDRAM
2GB total eMMC flash storage, of which 1GB is user storage
24VAC/DC power supply
5 Universal input: Type 3 (10K) thermistors, 0-100K ohm, 0-10VDC, 0-20mA with external resistance, voltage-free contact
2 analog outputs: 0-10VDC, 4mA max output current
3 Digital Output: Triac, 24VAC @.5 amps
2 10/100MB Ethernet ports, capable of chain topology
1 RS-485 serial port
Real time clock
Safe boot
Expandability: Connected to one (1) IO-R-34 shielded 485 bus.
Connection: From external sources - e.g. thermostats, variable speed drives or smart sensors - for data needed to execute applications, the Niagara Edge 10 enables connection to these types of external sources via BACnet/IP, Modbus and SNMP over an IP network and/or BACnet and Modbus over a 485 network.
Environmental parameters
Operating temperature: between -20 and 60°C
Storage temperature: between -40 and 85°C
Humidity: 5-95% non-condensing
Shipping & Vibration: ASTM D4169, Assurance Level II
